Pollution Stain Cleaner

Our Pollution Cleaner is a highly effective, organic cleaning detergent designed for the removal of atmospheric pollution stains. Certified by both Ecocert and Ecolabel, it features a powerful surfactant that enhances cleaning performance, even at room temperature, for the easiest application.

With superior wetting and penetrating properties, it breaks down and emulsifies pollutants, grime, and organic residues that accumulate on building facades, roofs, walls, and floors. Its advanced formula effortlessly lifts environmental stains caused by urban pollution, traffic emissions, and industrial fallout, restoring surfaces to their original appearance.

As an organic-based cleaner, it does not require rinsing after application, making it both efficient and eco-friendly. It is safe for use around non-ferrous metals such as aluminium windows and doors; so can be easily applied all over your surface. We always recommend treating a test patch prior to commencement of large scale treatment.

Due to its high-quality power, it should be used in a professional manor. It is an alkaline product therefore we recommend to avoid prolonged contact with skin and proper protective equipment should be worn.

State - Liquid
Colour - Colourless
pH @ 5% - 13
Density - 1.09

APPLICATION:

Steam Cleaner - Make a solution of around 20% concentration so that the concentration at the nozzle tip is approximately 2%.

Manual Spray - Concentration between 5-20% and higher if necessary. Apply and leave to act between 2 - 10 minutes before rinsing with hot water or brush with cold water.

Foaming Spray - Concentration between 5-30%. Apply and leave to act between 5 - 10 minutes before rinsing with pressurised water.

Do I need to rinse after application?

No, rinsing is not necessary as the ingredients are organic. However, for heavily soiled areas the mechanical action of rinsing will lift the emulsified dirt and staining from the surface leaving you with the clean surface that you want. Otherwise the removal of the dirt and staining will be a natural process.

What is the coverage for 1L?

The coverage depends upon the porosity of the surface, the concentration at which it is being used and the method of application. As a guide, applying with a compression or knapsack sprayer will give you a coverage between 20m2 and 120m2 per litre. This means that a 10-litre container will give you an approximate coverage between 200m2 and 1200m2.

Is it safe for the environment?

Yes! Our Pollution Stain Cleaner is certified by Ecocert and Ecolabel, ensuring it meets high environmental standards and is biodegradable.