Brass Sprayer Extensions

These are single piece, brass extensions that work with the standard spray lance for your sprayer and extend the reach of your spray pattern by 50cm, 70cm or 100cm.

To use you simply attach the lance extension to the stop valve (spray gun) of your sprayer then, to the other end, attach the original lance that was supplied with your sprayer. Therefore, it is designed to sit between the stop valve and the original spray lance.

Using a lance extension allows you to reach and spray further without the need for ladders or over reaching. These extensions should be used when you need just a little more reach which is why they are up to a maximum length of 1 metre. Should you need longer reach than this we recommend our range of telescopic lances that can reach various maximum lengths with the longest being 5.4 metres.

• Material - Brass
• Connection - Thread (male/female)
• Type - Single piece construction
• Length - 50cm, 70cm, 100cm
• Compatibility - Mesto compression & knapsack

Can I use more than one extension?

You can attach more than one lance extension to your sprayer as they will thread into each other however, the extensions are really designed to be used on their own. If you require a longer reach than a single extension can offer then we would recommend our range of telescopic lances that have a reach from 1.5 metres up to 5.4 metres.

How do I attach the spray nozzle?

The spray nozzle would just attach to the end of the lance extension and, normally, the thread is the same as the one on the original spray lance. However, the lance extension is designed to be attached to the stop valve (spray gun) with the spray lance fitting to the other end (therefore sitting between the gun and the lance) and you would normally attach the nozzle to the end of the original spray lance.